Touch Panel Computer Controlled Continuous Sealing Machine
FRKS-1420WD/SC Gas nitrogen flush vacuum continuous sealing machine，adopt touch screen integrated machine control. Including production count; running time; missed alarm function; gas nitrogen flush, vacuum ( can simultaneous use ).It is suitable for sealing and bag making of plastic film, and is widely used in food, medicine, chemical, daily use, seed and other industries. It is very good sealing equipment for bulk packaging in factories and stores.
This machine adopts electronic constant temperature control mechanism and stepless speed regulation transmission mechanism, which can seal plastic film bags of various materials. It can be used with various packaging lines, and its sealing length is not limited; it has high sealing effect. The sealing quality is reliable, the structure is reasonable, and the operation is convenient.
Standard Export Packaging
1. Ribbon printer part: One set of matching tablets (0-2), 5 pieces each, (3-9) 4 pieces each, (A, B, C) 1 piece each, blank slab 5 pieces, blank sheet 10 Granules, the temperature of the coding machine can be adjusted, and the date is clear and tidy.
2. The anti-leakage coding control system: can automatically detect the coding situation and realize the alarm function when the printing is missed.
3. Sealing pause function: that is, the printing stops when printing, and automatically continues to convey after printing to improve the printing resolution (this function is open, the machine is intermittent sealing mode), this user can selectively increase.
4. Vacuum and Gas Nitrogen flush at the same time: vacuum and gas nitrogen flush separately can be arranged by the customer.
The temperature of the coding machine can be adjusted, and the date is clear and tidy.The anti-leakage coding control system: can automatically detect the coding situation and with the alarm function when the printing is missed.
Coding pause function, that is, the conveying stops during printing, and the conveying is automatically continued after printing is completed to improve the clarity of printing. The coding part uses pure copper wire to cut the characters and prints with the ribbon, so that the printed content is clear and does not fade.
Before sealing, it can realize the steps of vacuuming, inflating and pumping and then inflating. It can be set freely according to production needs.Special equipment protection devices are installed to reduce working noise and extend equipment life.
PLC touch screen control equipment, production time and count. The interface is simple and clear, and the operation is convenient. When turning off the machine, click the "Delayed Shutdown" function, and the device will intelligently shut down according to the preset steps. In order to minimize the consumption of consumables. Save equipment maintenance costs and labor time costs.
|Heat sealing electric heating power||300W X 4；Double heating|
|Drive motor power||60W／220Ｖ50HZ|
|Gas source ||0.4-0.6Mpa|
|Print head thermal power ||100Ｗ|
|Sealing speed ||0-16m/min|
|Seal width ||17mm; (Other widths can be customized)|
|Sealing tape width ||20mm; (Other widths can be customized)|
|The sealing lines ||Overlapping curve|
|Sealing temperature adjustable range||0-300℃（Two sets of independent control of heating）|
|Sealing center to conveyor height||10-40mm Adjustable|
|Machine frame ||SUS 304|
|Conveying table single piece load ||2KG|
|Conveyor platform total load ||8KG|
|Conveyor table size ||1600mm X 310mm （L X W）|
|Conveyor belt size ||3060mm X 285mm （L X W）|
|Equipment dimensions||1600mm X 630mm X 1180mm (L x W x H)|
|Packing size||1850mm X 690mm X1200mm （L X W X H）|
|Weight ||NW: 125KG GW: 145 KG|
Inquiry and consulting support
Sample testing support
View our Factory
24 hours online support
Strict supply chain review
Standard export requires packing
On time delivery
Freight forwarders with than ten
years of cooperation
Copyright © 2020 Shanghai chuangling packaging machinery manufacturing co., ltd